2021.10.28 04:15 EvaPowell543 Go home reddit, you're drunk
|submitted by EvaPowell543 to YUROP [link] [comments]|
2021.10.28 04:15 Stalok Aba: starts talking about slurs / Destiny:
|submitted by Stalok to Destiny [link] [comments]|
2021.10.28 04:15 brobdingnagianme [O Level] Pure physics..even if it’s HERTZ, chin up!
hello! okay so a short memo here—I do not take pure physics but just wanted to put this out there for the brave souls who do! in case you couldn’t tell, i had to do some research before my pun could make it out there…I’m not sure how your physics paper went—whether it be be tough or manageable—but i just wish to say that you’ve come so far and we’re only down with a few more written papers so hang in there! if this paper was one that left you with a genuine smile ,congratulations 🎉✊✊! however, if this paper left you with a smile but a smiling-through-the-pain smile, chin up and cheer up! 🌟🌟 you’re already awesome for having come so far 😮💨
submitted by brobdingnagianme to SGExams [link] [comments]
2021.10.28 04:15 AITAthrowawaygymguy Client paid up front and now wants to cancel… help!?
Howdy, apologies if I come off as inexperienced or stupid... it's because I am. I started up my own graphic design/social media advertising business (no employees, just me) about 2 months ago, and while things have been pretty good, I've come to a bit of a bump in the road. One of my first clients was a special case, and was referred to me by a close relative. She had received money from a grant, and the deadline to spend it was fast approaching- so she decided to hire me. It was a super-rush job, but I managed to put together an invoice and a "contract" which led to a $3600 cash payment up front. (more on that contract later)
Anyway, people told me she would be tough to work with from the start, but I didn't really care because that money eliminated almost all of my debt. So I went into it with an open mind, tried my absolute best, aaaaand.... 3 weeks later, I'm fired.
I could tell things weren't going super well, but I was trying as hard as humanly possible to get on the same page as her, and I figured we could work things out. Unfortunately, she just sent an email saying she wants to terminate our contract and be repaid as soon as possible.
So- here's the situation. She says she's willing to pay me for the work I've already done, which would be about $625. That still leaves me with around $3000 owed- but things get a little dicier from here. In my business plan (which she hasn't seen), I specified a cancellation fee equal to 25% of all lost revenue. The thing is, that was not written in the contract we both signed (although I'm pretty sure I told her verbally at the start). Normally this would immediately disqualify me for that 25%, but it's a little more complicated in this situation.
That "contract" was made by me, on a google doc, in about 20 minutes. It didn't get within 100 feet of a lawyer. So, as far as I know, it doesn't really have any legal standing if it were to come down to it. But obviously, I don't want to reach that level of conflict in the first place. So, I want to figure out how to best navigate this situation and secure my 25%, or find an even better outcome. And that "better" outcome makes things even weirder.
When we first made our agreement (October), she made me date the invoice for August. The contract was set to last about 3 months, so when reporting the invoice to the grant office, it would look like we'd already been working together and were just nearing the end of our contract. I'm not 100% clear on the specifics of the grant, but I'm pretty sure this is fishy behaviour (plus, she paid me in cash).
So, if I were to pay her back any money (even excluding my 25%), it would be between the two of us and she wouldn't have to report any of that money to the grant office. Therefore, if she chooses not to tell anyone, she will have essentially just "cheated" her way into 2-3 thousand dollars. I honestly don't care too much whether she gets in trouble or not, but I figured this might be a way to actually avoid the whole situation.
I wouldn't threaten her, but I would remind her that if she were to go through with this refund, she'd have to report it to the grant office and she'd likely lose all of the money. I think that would be enough to keep her on board, and I could pitch switching to an hourly schedule until I work off the remaining balance. Her main concern has been that I'm "not understanding the essence of her business", but really she just needs 3 hours to explain something that could have been said in a 3 sentence email. So if we switch to an hourly payment plan, she could have all the time she wants with me, and I could work off the balance pretty quickly.
Anyway, I know this post is super lengthy, but I could really use some advice here. I'm not concerned about losing the client relationship or hurting my reputation (she's well known to be difficult), but going back into debt would be pretty crushing right now. So, I'm hoping that someone out there will have read through this wall of text and come out of it with some insight.
Help me out if you can!! :)
submitted by AITAthrowawaygymguy to smallbusiness [link] [comments]
2021.10.28 04:15 Polymathy1 Exide 31013 12V Automotive charger diagnosis
Hey, folks. I looked high and low for a diagram for this charger and the best I could do was some owners manuals without diagrams from some similar chargers.
This is a charger that's been in my family a while, and I cannot figure out what's wrong with it. A few years ago, an electronics-savvy (she rebuilt a PWM controller so it stopped shrieking at about 8KHz) friend diagnosed a bad SCR. I replaced that with one rated for 80A rather than the one that was crispy and rated for maybe 20A. She could be an electrical engineer, but I am only moderately good at basic diagnostics. So far, I have checked every resistor and diode while installed in the board and removed and checked the capacitors and transistors, all of which passed their testing. The secondary and primary are not shorted even on the 20M-Ohm setting and neither is shorted to the surface-rusted transformer body. The only thing I haven't tested is the LM358N simply because I don't know how to. I cleaned all contacts I could and replaced one crimped on terminal from the secondary side because the metal tore during removal. I found that crimp was a little loose today and added solder to improve the connection, hoping that was the problem, and I did remove the red insulation on the solid wire before replacing the crimp.
This charger uses a step-down transformer with 5 taps and a sliding selector switch to pick how much (I assume) of the winding is active. The secondary side is hooked to an aluminum plate with 2 somewhat bizarre pressed-in diodes, and the SCR is mounted to that with somewhat dry heat-sink paste, but it reads 0 ohms from the plate to the appropriate lead. The SCR Drain runs to one of the 12V clamps. A tap on the bottom of the secondary winding runs to an Ammeter, then the ammeter output leads to a breaker on the way to the other 12V charger clamp.
The charger worked great for about 2 years of occasional use after replacing the first SCR. Recently, it stopped charging altogether, but has started doing a few weird things. For one, I have managed to get the circuit breaker to pop with an arc inside it by changing the setting on the amperage switch. The amperage options are 6V-2A, 12V-2A, 12V-10A, and 12V-60A with a warning of no more than 3 seconds on the 60A engine start option. The Ammeter used to show that the charger was working, but the 10A setting often showed more like 4A, although that's typical over time as a battery charges. The Ammeter has continuity, and the one large electrolytic capacitor next to the 358 looked a little sketchy on top, but still registered a capacitance in my slightly fancy multimeter. It has an hFE setting I used to check the transistors too.
The problem: I am getting 0V on the output but I can hear a hum from the transformer when it's flipped momentarily to the 60A engine start. Most of the Primary windings had different resistance readings from the black lead to the other 4, but I did not write them down. I am hesitant to do anything with this "hot" because I live by myself and I've tasted 220V once. I suppose seeing if I have 12VAC on the 2 secondary leads and to the ammeter would tell me if the transformer is working or just shorting internally. I did remove the taps to the primary windings at one point, but I think I did it one at a time to avoid scrambling them. I did clean the contacts on the MS-MS1 circuit breaker.
What else... I did replace that horribly rusted LED because the leads snapped off. It illuminates when the battery is "fully charged", but it has been only occasionally flashing lately when I switch from the 12V-10A setting to a lower one. It only has about 30 components total, so it seems like it should be repairable. I guess could put 12V to the control board from a small battery pack, but I am not sure exactly how to do that or of the polarity. I would have to draw it out. I think I should put 12V to MS and ...? , then check for voltage between MS and PL1.
Major connections: Secondary to push-in diodes, 3rd secondary tap to Ammeter, Ammeter to MS1, B+ and B- to PL1 and MS (I can verify which is + if needed). The other 2 connectons are just an on/off switch between the 2 spade terminals in a line to the left of the breaker.
Can I have some help with this? I could buy a new one for about $50, but ... why? If the transformer is the problem, then I will, but if it's a $3 lm358n that needs to be replaced, then why not?
Can I test the 358 directly?
submitted by Polymathy1 to ElectronicsRepair [link] [comments]
2021.10.28 04:15 Mobc1990 Staying leaner or bulkier,which do you prefer?Which is healthier?
Being lean with abs more define or being bulkier with more muscle mass and less define abs,which do you prefer and also which would be healthier?
submitted by Mobc1990 to fitness30plus [link] [comments]
2021.10.28 04:15 Tresandas2021 Check out my new video about roblox !
|submitted by Tresandas2021 to shamelessplug [link] [comments]|
2021.10.28 04:15 zuleyha84 51% off >> $179.99 >> CT312 3 in 1 TIG/MMA/CUT Welding Machine Banggood Coupon Promo Code [Spain Warehouse]
|submitted by zuleyha84 to couponPromocode [link] [comments]|
2021.10.28 04:15 montanababy62 How did I get access to GPT-3 OpenAI's API? Tips are shared at 4:45 in the video! The rest of the videos explains what can GPT-3 really do and how it can help you or your company ?
2021.10.28 04:15 Spideyseth1 Halo 3 solo map issue
So I would like to create a single player map in Halo 3. In sapien I took high ground the multiplayer map and made a custom scenario of it and switched the level type to solo and added a single player spawn point. I then compiled the map and tried to replace the crows nest level and when I try to load the map it instantly takes me back to the main menu rather than the level I customized. Is there a way to make the level load from MCC's menu rather than the standalone portion of the mod tools?
submitted by Spideyseth1 to halomods [link] [comments]
2021.10.28 04:15 Jowa7 I guess adding some LINKIN PARK background music (In The End) to any video makes everything better.
|submitted by Jowa7 to LinkinPark [link] [comments]|
2021.10.28 04:15 ChippyBagg_ What happened?
I just slept and at the end I began to feel I was in a dream and I just was okay for 10 seconds and then for the First Time in lucid dreaming I started to think about scary thing and wanted to back out but when I backed out the dream I like felt My self just laying and could hear Everything but couldn’t move and I know about sleep paralysis but i always though that You Would see your worst fears but I just couldnt move for 10 seconds and heard a voice telling me to breath but I just wanted to know What people call This and What happened?
submitted by ChippyBagg_ to LucidDreaming [link] [comments]
2021.10.28 04:15 fufonet Advice needed: SaaS product - $50 per year
I've created a SaaS product that costs $50 per year. I have already many users that I get from different sources, such as websites who recommend about my product, youtube videos and also Google Organic.
2021.10.28 04:15 todesjockel365 HottestGirlsOnReddit
|submitted by todesjockel365 to HottestGirlsOnReddit [link] [comments]|
2021.10.28 04:15 Daigo100 TG4 - CAT A' HATA - OÍCHE SHAMHNA [SEE NOTE]
Dubbed Cat in the Hat cartoon. Halloween TV special (55mins). [Note - This is a screen record but the picture quality seems OK.] hxxps://mega.nz/file/KMsQATBL#3mD4KbRxhHWO_UTe0pNKmmN0_rbJIe4MWMQxPXTwoZE xx -> tt
submitted by Daigo100 to teilifis [link] [comments]
2021.10.28 04:15 NINJAOXZ1234 Does anyone else here play in a fully historical fashion?
Looking at the comments of u/MothEngineering's post I noticed a few people either saying they played with accurate guns or people wanted to start playing accurately and now I am curious if anyone else plays in a fully accurate fashion (i.e. accurate weapons and uniforms) either regularly or time to time
This ain't some kind of "historically accurate is the only way to play" post btw i just wanna know if anyone else is out there
submitted by NINJAOXZ1234 to BattlefieldV [link] [comments]
2021.10.28 04:15 davis946 Shrimps Turning Opal
2021.10.28 04:15 Ok-Interview2846 Fortnite Porn Tsuki
|submitted by Ok-Interview2846 to GYOEKBORh [link] [comments]|
2021.10.28 04:15 montanababy62 (No Spoilers for the love of God!) I started playing Nocturne but it has been hard to keep me entertained with it ;
After all the Hype i saw for Nocturne's Remake i decided to travel ahead and jump straight into it using emulators but here's the thing, the story is lacking for me atleast for now. I am in my 5th hour of playing, in the beginning it was ok, the world's over and we need to get out of this hospital so we ⠀don't get killed by the demons. NOW WHAT?? What am i doing in this game? I'm just following that reporter's order with no reason! What is the point now? I feel like i'm just going forward for no reason. Can you help me keep on playing?
submitted by montanababy62 to Megaten [link] [comments]
2021.10.28 04:15 platgamers تحميل لعبة TOTAL WAR WARHAMMER 2 للكمبيوتر من ميديا فاير و تورنت
|submitted by platgamers to Th3games [link] [comments]|
2021.10.28 04:15 GamingRocky_YT Unpopular opinion: Level 14 is a good change
This adds more progress to endgame players and with all other extra updates like earlier star point access and star levels and also less cards to upgrade and less coins to upgrade, it's a welcomed change. Also with the balanced change to challenges this game is now more balanced with more content. I've seen enough of those level 14 is bad changes, the dev team worked hard with those 3 new champions and all other data changes, please appreciate what you have. If you don't like clash Royale then just don't play it. Not to get emotional but please be satisfied by their hardworking only to entertain players and it's just a job for them.
submitted by GamingRocky_YT to ClashRoyale [link] [comments]
2021.10.28 04:15 Finish_Additional (Day 1-5) it gets EASIER day by day, just HOLD ON and you'll be amazed
This one is for all you 1-3 days strike/relapse boys. Those days are definitely hard, I'll just say based on my experience (had longer strikes before - 56 days the record) once you pass these days you get used to resisting urges at least somehow.
Hopes you'll find some comfort and motivation in these words and good luck on your journey 🙏❤️
submitted by Finish_Additional to NoFap [link] [comments]
2021.10.28 04:15 TrevorIsTheGOAT Just played this game for the first time, start to finish in one sitting. Here's the main thing I have to say (spoiler):
That ending :( I really enjoyed the combat, it's a bit janky but very gritty and weighty. But after fighting my way through grueling caverns and doing whatever it takes to get home... my god, that ending hit me like a ton of bricks.
Hey devs can we get a happy ending DLC lmao
submitted by TrevorIsTheGOAT to UntoTheEnd [link] [comments]
2021.10.28 04:15 F13Legend i play the game than it kick me out and say this idk what to do
|submitted by F13Legend to gachagaming [link] [comments]|
2021.10.28 04:15 bronzebeasts37 will selling coins get your account banned?